[Carbon-commits] [Carbon] svn commit r111057 - trunk/carbon/build/setup/stratos/repository/conf
damitha at wso2.com
damitha at wso2.com
Sat Jul 30 02:12:41 EDT 2011
Author: damitha
Date: Fri Jul 29 23:12:40 2011
New Revision: 111057
URL: http://wso2.org/svn/browse/wso2?view=rev&revision=111057
Log:
Added:
trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml
trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml
trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml
trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml
Added: trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/axis2_client.xml Fri Jul 29 23:12:40 2011
@@ -0,0 +1,299 @@
+<!--
+ ~ Copyright 2005-2007 WSO2, Inc. (http://wso2.com)
+ ~
+ ~ Licensed under the Apache License, Version 2.0 (the "License");
+ ~ you may not use this file except in compliance with the License.
+ ~ You may obtain a copy of the License at
+ ~
+ ~ http://www.apache.org/licenses/LICENSE-2.0
+ ~
+ ~ Unless required by applicable law or agreed to in writing, software
+ ~ distributed under the License is distributed on an "AS IS" BASIS,
+ ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ ~ See the License for the specific language governing permissions and
+ ~ limitations under the License.
+ -->
+
+<axisconfig name="AxisJava2.0">
+ <!-- ================================================= -->
+ <!-- Parameters -->
+ <!-- ================================================= -->
+ <parameter name="hotdeployment">true</parameter>
+ <parameter name="hotupdate">false</parameter>
+ <parameter name="enableMTOM">false</parameter>
+
+ <!-- commons-http-client defaultMaxConnPerHost -->
+ <parameter name="defaultMaxConnPerHost">500</parameter>
+ <!-- commons-http-client maxTotalConnections -->
+ <parameter name="maxTotalConnections">15000</parameter>
+
+ <!--If turned on with use the Accept header of the request to determine the contentType of the
+ response-->
+ <parameter name="httpContentNegotiation">false</parameter>
+
+ <!--During a fault, stacktrace can be sent with the fault message. The following flag will control -->
+ <!--that behaviour.-->
+ <parameter name="sendStacktraceDetailsWithFaults">true</parameter>
+
+ <!--If there aren't any information available to find out the fault reason, we set the message of the exception-->
+ <!--as the faultreason/Reason. But when a fault is thrown from a service or some where, it will be -->
+ <!--wrapped by different levels. Due to this the initial exception message can be lost. If this flag-->
+ <!--is set then, Axis2 tries to get the first exception and set its message as the faultreason/Reason.-->
+ <parameter name="DrillDownToRootCauseForFaultReason">false</parameter>
+
+ <!--This is the user name and password of admin console-->
+ <parameter name="userName">admin</parameter>
+ <parameter name="password">axis2</parameter>
+
+ <!--To override repository/services you need to uncomment following parameter and value SHOULD be absolute file path.-->
+ <!--ServicesDirectory only works on the following cases-->
+ <!---File based configurator and in that case the value should be a file URL (http:// not allowed)-->
+ <!---When creating URL Based configurator with URL “file://” -->
+ <!--- War based configurator with expanded case , -->
+
+ <!--All the other scenarios it will be ignored.-->
+ <!--<parameter name="ServicesDirectory">service</parameter>-->
+ <!--To override repository/modules you need to uncomment following parameter and value SHOULD be absolute file path-->
+ <!--<parameter name="ModulesDirectory">modules</parameter>-->
+
+ <!--Following params will set the proper context paths for invocations. All the endpoints will have a commons context-->
+ <!--root which can configured using the following contextRoot parameter-->
+ <!--<parameter name="contextRoot">axis2</parameter>-->
+
+ <!--Our HTTP endpoints can handle both REST and SOAP. Following parameters can be used to distinguish those endpoints-->
+ <!--<parameter name="servicePath">services</parameter>-->
+ <!--<parameter name="restPath">rest</parameter>-->
+
+ <!-- Following parameter will completely disable REST handling in Axis2-->
+ <parameter name="disableREST" locked="false">false</parameter>
+
+ <!--POJO deployer , this will alow users to drop .class file and make that into a service-->
+ <deployer extension=".class" directory="pojo" class="org.apache.axis2.deployment.POJODeployer"/>
+
+ <!-- Following parameter will set the host name for the epr-->
+ <!--<parameter name="hostname" locked="true">myhost.com</parameter>-->
+
+ <!-- ================================================= -->
+ <!-- Message Receivers -->
+ <!-- ================================================= -->
+ <!--This is the Default Message Receiver for the system , if you want to have MessageReceivers for -->
+ <!--all the other MEP implement it and add the correct entry to here , so that you can refer from-->
+ <!--any operation -->
+ <!--Note : You can override this for particular service by adding the same element with your requirement-->
+ <messageReceivers>
+ <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-only"
+ class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+ <messageReceiver mep="http://www.w3.org/2004/08/wsdl/in-out"
+ class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+ <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-only"
+ class="org.apache.axis2.receivers.RawXMLINOnlyMessageReceiver"/>
+ <messageReceiver mep="http://www.w3.org/2006/01/wsdl/in-out"
+ class="org.apache.axis2.receivers.RawXMLINOutMessageReceiver"/>
+ </messageReceivers>
+
+ <!-- ================================================= -->
+ <!-- Message Formatter -->
+ <!-- ================================================= -->
+ <!--Following content type to message formatter mapping can be used to implement support for different message -->
+ <!--format serialization in Axis2. These message formats are expected to be resolved based on the content type. -->
+ <messageFormatters>
+ <messageFormatter contentType="application/x-www-form-urlencoded"
+ class="org.apache.axis2.transport.http.XFormURLEncodedFormatter"/>
+ <messageFormatter contentType="multipart/form-data"
+ class="org.apache.axis2.transport.http.MultipartFormDataFormatter"/>
+ <messageFormatter contentType="application/xml"
+ class="org.apache.axis2.transport.http.ApplicationXMLFormatter"/>
+ <messageFormatter contentType="text/xml"
+ class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
+ <messageFormatter contentType="application/soap+xml"
+ class="org.apache.axis2.transport.http.SOAPMessageFormatter"/>
+ <!--JSON Message Formatters-->
+ <messageFormatter contentType="application/json"
+ class="org.apache.axis2.json.JSONMessageFormatter"/>
+ <messageFormatter contentType="application/json/badgerfish"
+ class="org.apache.axis2.json.JSONBadgerfishMessageFormatter"/>
+ <messageFormatter contentType="text/javascript"
+ class="org.apache.axis2.json.JSONMessageFormatter"/>
+ </messageFormatters>
+
+ <!-- ================================================= -->
+ <!-- Message Builders -->
+ <!-- ================================================= -->
+ <!--Following content type to builder mapping can be used to implement support for different message -->
+ <!--formats in Axis2. These message formats are expected to be resolved based on the content type. -->
+ <messageBuilders>
+ <messageBuilder contentType="application/xml"
+ class="org.apache.axis2.builder.ApplicationXMLBuilder"/>
+ <messageBuilder contentType="application/x-www-form-urlencoded"
+ class="org.apache.axis2.builder.XFormURLEncodedBuilder"/>
+ <!--JSON Message Builders-->
+ <messageBuilder contentType="application/json"
+ class="org.apache.axis2.json.JSONOMBuilder"/>
+ <messageBuilder contentType="application/json/badgerfish"
+ class="org.apache.axis2.json.JSONBadgerfishOMBuilder"/>
+ <messageBuilder contentType="text/javascript"
+ class="org.apache.axis2.json.JSONOMBuilder"/>
+ <!--Left commented because it adds the depandancy of servlet-api to other modules.
+ Please uncomment to Receive messages in multipart/form-data format-->
+ <!--<messageBuilder contentType="multipart/form-data"-->
+ <!--class="org.apache.axis2.builder.MultipartFormDataBuilder"/>-->
+ </messageBuilders>
+
+ <!-- ================================================= -->
+ <!-- Target Resolvers -->
+ <!-- ================================================= -->
+ <!-- Uncomment the following and specify the class name for your TargetResolver to add -->
+ <!-- a TargetResolver. TargetResolvers are used to process the To EPR for example to -->
+ <!-- choose a server in a cluster -->
+ <!--<targetResolvers>-->
+ <!--<targetResolver class="" />-->
+ <!--</targetResolvers>-->
+
+
+ <!-- ================================================= -->
+ <!-- Transport Ins -->
+ <!-- ================================================= -->
+ <transportReceiver name="http"
+ class="org.apache.axis2.transport.http.SimpleHTTPServer">
+ <parameter name="port">6071</parameter>
+ <!--If you want to give your own host address for EPR generation-->
+ <!--uncomment following parameter , and set as you required.-->
+ <!--<parameter name="hostname">http://myApp.com/ws</parameter>-->
+ </transportReceiver>
+
+ <!--Uncomment if you want to have TCP transport support-->
+ <!--<transportReceiver name="tcp"
+ class="org.apache.axis2.transport.tcp.TCPServer">
+ <parameter name="port">6061</parameter>-->
+ <!--If you want to give your own host address for EPR generation-->
+ <!--uncomment following parameter , and set as you required.-->
+ <!--<parameter name="hostname">tcp://myApp.com/ws</parameter>-->
+ <!--</transportReceiver>-->
+
+ <!-- ================================================= -->
+ <!-- Transport Outs -->
+ <!-- ================================================= -->
+
+ <!--<transportSender name="jms"-->
+ <!--class="org.apache.axis2.transport.jms.JMSSender"/>-->
+ <transportSender name="tcp"
+ class="org.apache.axis2.transport.tcp.TCPTransportSender"/>
+ <transportSender name="local"
+ class="org.apache.axis2.transport.local.LocalTransportSender"/>
+ <transportSender name="http"
+ class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+ <parameter name="PROTOCOL">HTTP/1.1</parameter>
+ <parameter name="Transfer-Encoding">chunked</parameter>
+ <parameter name="SO_TIMEOUT">60000</parameter>
+ <parameter name="CONNECTION_TIMEOUT">60000</parameter>
+ </transportSender>
+ <transportSender name="https"
+ class="org.apache.axis2.transport.http.CommonsHTTPTransportSender">
+ <parameter name="PROTOCOL">HTTP/1.1</parameter>
+ <parameter name="Transfer-Encoding">chunked</parameter>
+ <parameter name="SO_TIMEOUT">60000</parameter>
+ <parameter name="CONNECTION_TIMEOUT">60000</parameter>
+ </transportSender>
+ <!--<transportSender name="java"-->
+ <!--class="org.apache.axis2.transport.java.JavaTransportSender"/>-->
+
+
+ <!-- ================================================= -->
+ <!-- SOAP Role Configuration -->
+ <!-- ================================================= -->
+ <!-- Use the following pattern to configure this axis2
+ instance to act in particular roles. Note that in
+ the absence of any configuration, Axis2 will act
+ only in the ultimate receiver role -->
+ <!--
+ <SOAPRoleConfiguration isUltimateReceiver="true">
+ <role>http://my/custom/role</role>
+ </SOAPRoleConfiguration>
+ -->
+
+ <!-- ================================================= -->
+ <!-- Phases -->
+ <!-- ================================================= -->
+ <phaseOrder type="InFlow">
+ <!-- System pre-defined phases -->
+ <phase name="Transport">
+ <handler name="RequestURIBasedDispatcher"
+ class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher">
+ <order phase="Transport"/>
+ </handler>
+ <handler name="SOAPActionBasedDispatcher"
+ class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher">
+ <order phase="Transport"/>
+ </handler>
+ </phase>
+ <phase name="Addressing">
+ <handler name="AddressingBasedDispatcher"
+ class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
+ <order phase="Addressing"/>
+ </handler>
+ </phase>
+ <phase name="Security"/>
+ <phase name="PreDispatch"/>
+ <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+ <handler name="RequestURIBasedDispatcher"
+ class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
+ <handler name="SOAPActionBasedDispatcher"
+ class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
+ <handler name="RequestURIOperationDispatcher"
+ class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
+ <handler name="SOAPMessageBodyBasedDispatcher"
+ class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
+
+ <handler name="HTTPLocationBasedDispatcher"
+ class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
+ </phase>
+ <phase name="RMPhase"/>
+ <!-- System pre defined phases -->
+ <!-- After Postdispatch phase module author or or service author can add any phase he want -->
+ <phase name="OperationInPhase"/>
+ </phaseOrder>
+ <phaseOrder type="OutFlow">
+ <!-- user can add his own phases to this area -->
+ <phase name="OperationOutPhase"/>
+ <!--system predefined phase-->
+ <!--these phase will run irrespective of the service-->
+ <phase name="RMPhase"/>
+ <phase name="PolicyDetermination"/>
+ <phase name="MessageOut"/>
+ <phase name="Security"/>
+ </phaseOrder>
+ <phaseOrder type="InFaultFlow">
+ <phase name="Addressing">
+ <handler name="AddressingBasedDispatcher"
+ class="org.apache.axis2.dispatchers.AddressingBasedDispatcher">
+ <order phase="Addressing"/>
+ </handler>
+ </phase>
+ <phase name="Security"/>
+ <phase name="PreDispatch"/>
+ <phase name="Dispatch" class="org.apache.axis2.engine.DispatchPhase">
+ <handler name="RequestURIBasedDispatcher"
+ class="org.apache.axis2.dispatchers.RequestURIBasedDispatcher"/>
+ <handler name="SOAPActionBasedDispatcher"
+ class="org.apache.axis2.dispatchers.SOAPActionBasedDispatcher"/>
+ <handler name="RequestURIOperationDispatcher"
+ class="org.apache.axis2.dispatchers.RequestURIOperationDispatcher"/>
+ <handler name="SOAPMessageBodyBasedDispatcher"
+ class="org.apache.axis2.dispatchers.SOAPMessageBodyBasedDispatcher"/>
+
+ <handler name="HTTPLocationBasedDispatcher"
+ class="org.apache.axis2.dispatchers.HTTPLocationBasedDispatcher"/>
+ </phase>
+ <phase name="RMPhase"/>
+ <!-- user can add his own phases to this area -->
+ <phase name="OperationInFaultPhase"/>
+ </phaseOrder>
+ <phaseOrder type="OutFaultFlow">
+ <!-- user can add his own phases to this area -->
+ <phase name="OperationOutFaultPhase"/>
+ <phase name="RMPhase"/>
+ <phase name="PolicyDetermination"/>
+ <phase name="MessageOut"/>
+ <phase name="Security"/>
+ </phaseOrder>
+</axisconfig>
Added: trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/broker-config.xml Fri Jul 29 23:12:40 2011
@@ -0,0 +1,52 @@
+<!--
+ ~ Copyright 2005-2007 WSO2, Inc. (http://wso2.com)
+ ~
+ ~ Licensed under the Apache License, Version 2.0 (the "License");
+ ~ you may not use this file except in compliance with the License.
+ ~ You may obtain a copy of the License at
+ ~
+ ~ http://www.apache.org/licenses/LICENSE-2.0
+ ~
+ ~ Unless required by applicable law or agreed to in writing, software
+ ~ distributed under the License is distributed on an "AS IS" BASIS,
+ ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ ~ See the License for the specific language governing permissions and
+ ~ limitations under the License.
+ -->
+
+<eventBroker xmlns="http://wso2.org/ns/2009/09/eventing">
+ <eventStream name="RegistryEventBroker">
+ <subscriptionManager class="org.wso2.carbon.event.broker.subscriptions.EmbeddedRegistryBasedSubscriptionManager">
+ <parameter name="topicHeaderName">topic</parameter>
+ <parameter name="topicHeaderNS">http://wso2.org/ns/2009/09/eventing/notify</parameter>
+ <parameter name="subscriptionStoragePath">/repository/components/org.wso2.carbon.event</parameter>
+ </subscriptionManager>
+ <!-- Uncomment to to RemoteRegistryBasedSubscriptionManager -->
+ <!--subscriptionManager class="org.wso2.carbon.event.broker.subscriptions.RemoteRegistryBasedSubscriptionManager">
+ <parameter name="topicHeaderName">topic</parameter>
+ <parameter name="topicHeaderNS">http://wso2.org/ns/2009/09/eventing/notify</parameter>
+ <parameter name="subscriptionStoragePath">/repository/components/org.wso2.carbon.event</parameter>
+ <parameter name="registryURL">http://remote-ip:port/registry/</parameter>
+ <parameter name="username">username</parameter>
+ <parameter name="password">password</parameter>
+ </subscriptionManager-->
+ <eventDispatcher>org.wso2.carbon.registry.eventing.RegistryEventDispatcher</eventDispatcher>
+ <notificationManager class="org.wso2.carbon.event.broker.CarbonNotificationManager">
+ <parameter name="minSpareThreads">25</parameter>
+ <parameter name="maxThreads">150</parameter>
+ <parameter name="maxQueuedRequests">100</parameter>
+ <!-- Keep Alive time in nano seconds -->
+ <parameter name="keepAliveTime">1000</parameter>
+ <!-- Specify path of security policy file to enable security. -->
+ <!--parameter name="securityPolicy">policypath</parameter-->
+
+ <!-- Parameters specific to the Registry Event Broker configuration -->
+ <!-- Set this as false to disable displaying of registry URL in notification e-mails -->
+ <parameter name="showRegistryURL" locked="true">true</parameter>
+ <!-- Set this to print the powered-by message in notification e-mails. -->
+ <parameter name="registryPoweredBy" locked="true">This message is automatically generated by the ${product.name}.</parameter>
+ <!-- Set this to customize the URL printed in notification e-mails. -->
+ <!--parameter name="registryURL" locked="true">https://localhost:9443/carbon/</parameter-->
+ </notificationManager>
+ </eventStream>
+</eventBroker>
Added: trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/jgroups-s3_ping-aws.xml Fri Jul 29 23:12:40 2011
@@ -0,0 +1,20 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<config>
+ <TCP bind_port="7800"/>
+ <S3_PING secret_access_key="replace with your secret access key" access_key="replace with your access key"
+ location="replace with your s3 bucket name"/>
+ <MERGE2 max_interval="30000" min_interval="10000"/>
+ <FD_SOCK/>
+ <FD timeout="10000" max_tries="5"/>
+ <VERIFY_SUSPECT timeout="1500"/>
+ <pbcast.NAKACK use_mcast_xmit="false" gc_lag="0" retransmit_timeout="300,600,1200,2400,4800"
+ discard_delivered_msgs="true"/>
+ <UNICAST timeout="300,600,1200,2400,3600"/>
+ <pbcast.STABLE stability_delay="1000" desired_avg_gossip="50000" max_bytes="400000"/>
+ <VIEW_SYNC avg_send_interval="60000"/>
+ <pbcast.GMS print_local_addr="true" join_timeout="60000" view_bundling="true"/>
+ <FC max_credits="20000000" min_threshold="0.10"/>
+ <FRAG2 frag_size="60000"/>
+ <pbcast.STATE_TRANSFER/>
+ <pbcast.FLUSH timeout="0"/>
+</config>
Added: trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml
URL: http://wso2.org/svn/browse/wso2/trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml?pathrev=111057
==============================================================================
--- (empty file)
+++ trunk/carbon/build/setup/stratos/repository/conf/mgt-transports.xml Fri Jul 29 23:12:40 2011
@@ -0,0 +1,123 @@
+<!--
+ ~ Copyright 2005-2007 WSO2, Inc. (http://wso2.com)
+ ~
+ ~ Licensed under the Apache License, Version 2.0 (the "License");
+ ~ you may not use this file except in compliance with the License.
+ ~ You may obtain a copy of the License at
+ ~
+ ~ http://www.apache.org/licenses/LICENSE-2.0
+ ~
+ ~ Unless required by applicable law or agreed to in writing, software
+ ~ distributed under the License is distributed on an "AS IS" BASIS,
+ ~ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ ~ See the License for the specific language governing permissions and
+ ~ limitations under the License.
+ -->
+
+<!--
+ ~ This file contains the configuration of the transport connectors used by
+ ~ the embedded application server instance which hosts the Carbon management
+ ~ console
+ -->
+
+<transports>
+
+ <!--
+ HTTP Transport configuration. The configuration parameters are same as those of the Tomcat 7
+ HTTP Connector configuration. For more details on config parameters see
+ http://tomcat.apache.org/tomcat-7.0-doc/config/http.html
+ -->
+ <transport name="http" class="org.wso2.carbon.server.transports.http.HttpTransport">
+ <!--
+ The Tomcat connector protocol to be used. Valid values are;
+
+ 1. HTTP_11
+ 2. HTTP_11_NIO
+ 3. HTTP_11_APR
+ -->
+ <parameter name="protocol">HTTP_11_NIO</parameter>
+
+ <!-- ${Ports.ServletTransports.HTTP} is defined in the Ports section of the carbon.xml -->
+ <parameter name="port">${Ports.ServletTransports.HTTP}</parameter>
+
+ <!--
+ Uncomment the following to enable Apache2 mod_proxy. The port on the Apache server is 80
+ in this case.
+ -->
+ <!--<parameter name="proxyPort">80</parameter>-->
+
+ <!--<parameter name="address">127.0.0.1</parameter>-->
+ <parameter name="maxHttpHeaderSize">8192</parameter>
+ <parameter name="acceptorThreadCount">2</parameter>
+ <parameter name="maxThreads">250</parameter>
+ <parameter name="minSpareThreads">50</parameter>
+ <parameter name="disableUploadTimeout">false</parameter>
+ <parameter name="connectionUploadTimeout">120000</parameter>
+ <parameter name="maxKeepAliveRequests">200</parameter>
+ <parameter name="acceptCount">200</parameter>
+ <parameter name="server">WSO2 Carbon Server</parameter>
+
+ <parameter name="compression">on</parameter>
+ <parameter name="compressionMinSize">2048</parameter>
+ <parameter name="noCompressionUserAgents">gozilla, traviata</parameter>
+ <parameter name="compressableMimeType">
+ text/html,text/javascript,application/x-javascript,application/javascript,application/xml,text/css,application/xslt+xml,text/xsl,image/gif,image/jpg,image/jpeg
+ </parameter>
+ </transport>
+
+ <!--
+ HTTPS Transport configuration. The configuration parameters are same as those of the Tomcat 7
+ HTTPS Connector configuration. For more details on config parameters see
+ http://tomcat.apache.org/tomcat-7.0-doc/config/http.html
+ -->
+ <transport name="https" class="org.wso2.carbon.server.transports.http.HttpTransport">
+
+ <!--
+ The Tomcat connector protocol to be used. Valid values are;
+
+ 1. HTTPS_11
+ 2. HTTPS_11_NIO
+ 3. HTTPS_11_APR
+ -->
+ <parameter name="protocol">HTTPS_11_NIO</parameter>
+
+ <!-- ${Ports.ServletTransports.HTTPS} is defined in the Ports section of the carbon.xml -->
+ <parameter name="port">${Ports.ServletTransports.HTTPS}</parameter>
+
+ <!--
+ Uncomment the following to enable Apache2 mod_proxy. The port on the Apache server is 443
+ in this case.
+ -->
+ <!--<parameter name="proxyPort">443</parameter>-->
+ <!--
+ Uncomment the following to run on IBM J9 VM. Also, change the sslProtocol to SSL from the
+ Default value of TLS.
+ -->
+ <!--<parameter name="algorithm">IbmX509</parameter>-->
+ <parameter name="sslProtocol">TLS</parameter>
+ <!--<parameter name="address">127.0.0.1</parameter>-->
+ <parameter name="maxHttpHeaderSize">8192</parameter>
+ <parameter name="acceptorThreadCount">2</parameter>
+ <parameter name="maxThreads">250</parameter>
+ <parameter name="minSpareThreads">50</parameter>
+ <parameter name="enableLookups">false</parameter>
+ <parameter name="disableUploadTimeout">false</parameter>
+ <parameter name="connectionUploadTimeout">120000</parameter>
+ <parameter name="maxKeepAliveRequests">200</parameter>
+ <parameter name="acceptCount">200</parameter>
+ <parameter name="server">WSO2 Carbon Server</parameter>
+
+ <parameter name="clientAuth">false</parameter>
+
+ <parameter name="compression">on</parameter>
+ <parameter name="compressionMinSize">2048</parameter>
+ <parameter name="noCompressionUserAgents">gozilla, traviata</parameter>
+ <parameter name="compressableMimeType">
+ text/html,text/javascript,application/x-javascript,application/javascript,application/xml,text/css,application/xslt+xml,text/xsl,image/gif,image/jpg,image/jpeg
+ </parameter>
+ <parameter name="keystoreFile">
+ ${carbon.home}/repository/resources/security/wso2carbon.jks
+ </parameter>
+ <parameter name="keystorePass">wso2carbon</parameter>
+ </transport>
+</transports>
More information about the Carbon-commits
mailing list